nakbrooks Posted April 30, 2018 Report Share Posted April 30, 2018 Pretty basic question this. I tend to sync from Autoslew but TheSkyX (and most other software that connects to the telescope via ASCOM) obviously also has a sync function. Am I correct that it doesn’t matter in which application I do the sync? In other words, if I have TheSkyX (and possibly multiple other packages via an ASCOM hub) all connected to Autoslew then doing a sync in one of them automatically causes them all to sync? Link to comment Share on other sites More sharing options...
tbaehnck Posted April 30, 2018 Report Share Posted April 30, 2018 Hi Nigel, in theory you are correct. What I recognized was that there si always a small amount difference when syncing with sequence and e.x. MaximDl which not be can described with year now/ y2000 problematic. e.x. when i sync in maximdl with plate solve a frame and after that without moving the telescope do the same in sequence, sequence shows me a little offset. But to your question normally it doesn't matter in which software the sync will be made. BR Thomas Link to comment Share on other sites More sharing options...
nakbrooks Posted May 1, 2018 Author Report Share Posted May 1, 2018 Thanks Thomas. That confirms what I thought. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now