Jump to content


Photo

New Autoslew Version available Autoslew version 5247

Autoslew

  • Please log in to reply
5 replies to this topic

#1 Artem

Artem

    Member

  • Beta Tester
  • 52 posts

Posted 25 January 2019 - 09:49 PM

Hello,

 

By surprise, did check today if any new software version is available and was surprsied to find

the Autoslew version 5.2.4.7 is available ( not a BETA version )

 

https://drive.google...QVpPZWlxaXBUVEk

 

Regards

 

Martin


Edited by Artem, 25 January 2019 - 10:09 PM.


#2 Artem

Artem

    Member

  • Beta Tester
  • 52 posts

Posted 25 January 2019 - 10:09 PM

The changes in 5.2.4.7

 

Version 5.2.4.7
- Fourier Error Superfit Bug corrected
- New ACC 27 to allow useage of 2 absolute rotators in ACC gateway
- Bug corrected with Dome Azimuth position on east side with german mounts


Edited by Artem, 25 January 2019 - 10:09 PM.


#3 john32712

john32712

    Member

  • Beta Tester
  • 133 posts
  • LocationFlorida USA

Posted 29 January 2019 - 02:46 AM

Thanks for the post Artem!



#4 cfm2004

cfm2004

    Member

  • Beta Tester
  • 46 posts
  • LocationSan Romualdo - Ravenna (Italy)

Posted 19 February 2019 - 03:01 PM

Thank you very much for the post!

 

Cristina


Cristina & Fiorenzo Mazzotti
http://www.cfm2004.altervista.org/

#5 Corpze

Corpze

    Member

  • Beta Tester
  • 216 posts
  • LocationSweden - Arvika

Posted 31 May 2019 - 12:42 PM

I have serious issues starting the program, it won't start at all.
New win 10 Pro with ascom 6.4 installed.
Running as admin. Can't see what the problem would be :/



#6 Corpze

Corpze

    Member

  • Beta Tester
  • 216 posts
  • LocationSweden - Arvika

Posted 31 May 2019 - 03:53 PM

Update - This error was caused by the swedish language pack - I changed to english and all worked fine again! (probably the sam issue as someone else had with "." changed to ","

/Daniel







Also tagged with one or more of these keywords: Autoslew

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users