ChristerS Posted September 7, 2019 Report Share Posted September 7, 2019 Hi, Upgrade my PC tol Windows 10 1903 and now autoslew and Sequence dont start. Anyone else with same problem? Have emaild ASA. Cheers, //Christer Link to comment Share on other sites More sharing options...
DaveS Posted September 7, 2019 Report Share Posted September 7, 2019 I have windows 10 1903 on my imaging PC and have no problems opening Autoslew or Sequence. The problems I had with Sequence were from another origen. Link to comment Share on other sites More sharing options...
ChristerS Posted September 8, 2019 Author Report Share Posted September 8, 2019 Hi, Works on another Win 10 1903 computer so something with .NET framwork or similira is bad. Tried the FTDI driver replacement guide but no luck, the fact that Autoslew dont even start up after reinstalling it and also reinstalled ascom should exclude the FDTI problem. Couls be wrong VB runtime installed only Keller nows. //Christer Link to comment Share on other sites More sharing options...
ChristerS Posted September 18, 2019 Author Report Share Posted September 18, 2019 Now I installed a new clean computer with win 10 1903 pro, all the win updates made but still the same behavior autoslew just shows a second and nothing more When starting sequence I get the error log below, it crashes also. System.InvalidCastException: Conversion from string "1.23" to type 'Double' is not valid. ---> System.FormatException: Input string was not in a correct format. Now the god news I changed the regional number format settings decimal symbol from “,” to “.” And all works but how could that happens when moving to win 10 1903 only MS knows //Christer Link to comment Share on other sites More sharing options...
Corpze Posted September 19, 2019 Report Share Posted September 19, 2019 I was just about to write that you could try change regioon format, the same thing happend to me as well.Also, set every program to run as admin./Daniel Link to comment Share on other sites More sharing options...
ChristerS Posted October 30, 2019 Author Report Share Posted October 30, 2019 Hi, Well P.Keller told me some time ago I should not run any ASA program as admin, I have hade som issue when doing that, no clue why though. Cheers, //Christer Link to comment Share on other sites More sharing options...
Corpze Posted November 13, 2019 Report Share Posted November 13, 2019 Hi, Well P.Keller told me some time ago I should not run any ASA program as admin, I have hade som issue when doing that, no clue why though. Cheers, //Christer Hmm, that seems strange as i am 99% sure that i have read some manual PDF that states the program should run in admin mode... That works for me as i had some problems when i run the program in non-admin mode. Whatever floats your boat seems to fit in this aspect. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now