Jump to content


Photo

Pier base plate: ball pivot misalignment

DDM160 pier

  • Please log in to reply
1 reply to this topic

#1 DDM160_user

DDM160_user

    Member

  • Beta Tester
  • 15 posts
  • LocationNorway

Posted 27 March 2014 - 04:06 PM

The large ball pivot in the center of the base plate of the DDM160 pier is difficult to align when mating the pier to the base plate. The female part of the pivot tends to lock in place at an angle. This prevents the pier from resting on the two cylindrical side supports which are welded to the base of the pier.

 

Any tips on how to prevent this?

 

Attached File  Baseplate.JPG   44.99KB   3 downloads

 

Thanks,

Robert W. Williams


Robert W. Williams
website: http://www.dinium.net/english

#2 DDM160_user

DDM160_user

    Member

  • Beta Tester
  • 15 posts
  • LocationNorway

Posted 28 March 2014 - 09:05 AM

Ooops, no problem. The pivot adjusted itself into position. The pressure from the pier simply pushed it into place. The day after I discovered the problem, it corrected itself!

Regards,

Robert


Robert W. Williams
website: http://www.dinium.net/english





Also tagged with one or more of these keywords: DDM160, pier

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users