Jump to content


Photo

Design of ASA 2" 0.73X Focal Recucer Coma Corrector Lens Cell


  • Please log in to reply
No replies to this topic

#1 YahooGroup

YahooGroup

    Member

  • ASA STAFF
  • 14 posts

Posted 19 May 2013 - 05:44 PM

This is a transfered topic from the ASA Yahoo Group.

 

Posted By: peter2a6 Sun Mar 31, 2013 8:21 pm

I am suffering from what appears to one or more loose elements in my 2" ASA
corrector. Some in this group have had success correcting this problem by
tightening the retaining ring on the element closest to the secondary mirror.

Does anyone know if the lens cell has more than one of these retaining rings? In
other words, will tightening the exposed ring (end near secondary) apply
pressure to the remaining elements in the lens cell? I would expect this not to
be the case.

Peter

____________________________________________________________

Posted By: aperezam Mon Apr 1, 2013 4:53 pm

Hi Peter,

The one at the end of the corrector is the only retaining ring.
Taking it out you can dismantle the whole thing, and yes, tightening
it will apply pressure to all the elements in the lens cell.

Best regards,
Antonio.

____________________________________________________________

Posted By: peter2a6 Tue Apr 2, 2013 2:55 pm

Thanks Antonio!

Peter

 






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users