problem with dawn flats

[kwiechen]

Sequence 2.0.9, AS 5.2.1.9

 

The sequence ends with

 

05:47:47.734: Saved Image D:\SequenceImages\2016-08-31\NGC7318-_R-0005.fits
05:47:48.234: Finished Sequence Run
07:00:39.390: Slewing to 2h53m5,7  +35°23m16 Pierside Autoslew Decide
07:00:40.296: Closing Up everything
07:00:40.296: Parking Telescope
07:01:03.515: Closing Telescope Cover now
07:01:10.031: making Line 1 Suffix _flatB

 

 

The status bar shows "user stopped flats!". 

 

 

Best regards

 

Kai

[lukepower]

Hi Kai,

 

maybe you have to set manually the time it should close the roof...Just an idea

[kwiechen]

Hi Lukas,

 

for me there is no roof or cover control, but increasing "Stop timing" in Sequence settings helps here. Flats are treated as prefix and postfix and are not calculated as part of the sequence timings??

 

There ist another problem: flat binning settings are ignored .. the flats are always recorded with binning 1.

 

Kai