1. Place tripod or pier with bubble level (2 min.)
2. Place DDM60 on tripod/pier (< 1 min.)
3. Place counterweightbar, counterweights, OTA (5 min.)
4. Connect DDM60 to PC and start Autoslew (< 1 min.)
5. Point built-in laser at Polaris (2 min.)
6. Balance setup with help of Balancing Tool in Autoslew (5 min.)
7. Tune PID parameters, use the autotune feature in Autoslew (3 min.)
8. Use Sequence to create a 3-star pointing model (automated) to fine tune the polar alignment. (5 min)
9. Polar alignment routine; Autoslew will move star from center position, recenter with bolts, if you do this a couple of times (step 8 and 9) PA will be spot on. (5 min)
--- time spent a half hour ---
10. Create all-sky pointing model with Sequence (automated) or declination model (MLTP), both automated. MLTP is best for mobile setups IMO.
11. Start imaging session, unguided
You'll get faster every time...