Jump to content
choi jong min

vignetting of ASA 3" corrector

Recommended Posts

Hi.

I use ASA N10 and 3" wynne corrector with QSI683wsg camera.

And I use astrodon 31mm filters. and adapter made by ASA for qsi683wsg.

When I took a picture with above system, there is vignetting on each corner.

I wonder that where the vignetting came from. Is it just vignetting or interference of ray path with adapter??

Here I attached raw image file (R channel, 300sec exp. 2bin), please some one analysis it 

Thank you for advance.

 

m3 -001r.fit

Share this post


Link to post
Share on other sites

The ASA10N/3"Wynne does not vignette noticeably with a KAF8300 size sensor.

I see no vignetting with a similar set-up, but I use 36mm filters. The adapter is 42mm i.d.

When checking for ray path obstructions remember that the rays are converging. I suspect the filters may be too small.

Mark

Share this post


Link to post
Share on other sites
On 4/15/2020 at 3:21 AM, MarkS said:

The ASA10N/3"Wynne does not vignette noticeably with a KAF8300 size sensor.

I see no vignetting with a similar set-up, but I use 36mm filters. The adapter is 42mm i.d.

When checking for ray path obstructions remember that the rays are converging. I suspect the filters may be too small.

Mark

Or not close enough to the sensor...

Share this post


Link to post
Share on other sites
1 hour ago, choi jong min said:

Hi.

May I know the meaning that you told 'not close enough to the sensor'

Does it mean, distance between corrector and CCD ?

 

Thank you

BR JM Choi

No, I mean distance between filter and sensor. Filter should be as close to the sensor as possible.

Edited by Waldemar

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...